Phoenix Dongle Crack Download !!BETTER!!
Download File
Tools For assembling and programming the board, please use these tools: * 1.5mm flat head screwdriver * 7mm Phillips head screwdriver * Probe and soldering iron * Solder * Multi-meter * Solder Gun * Heat Mat * Cut-off or utility knife * Multimeter (optional) ## Setup First, please get the GIT repository at: * Make sure that you have setup the development tools on your computer before starting, that's it! 1. Open a terminal and change into the "GIT" folder. 2. Change into the root folder of the repository using cd scripts
3. Now, we need to make a change to one of the scripts. 1. nano run-application.sh
2. Run this script.
3. At the end, run./run-application.sh
4. You may need to do a source run-application.sh
in your shell in order for these changes to be reflected 5. If you have not yet installed Python3, install it 1. Install Python3 on Ubuntu and Debian, Windows and Mac using apt-get
or yum
2. sudo apt-get install python3
3. sudo apt-get install python3-pip
4. sudo yum install python3-pip
6. Python3 is no longer required to run the PhoenixRC shell, but it should be installed anyway, so you may as well, for the sake of being on the safe side. 7. Also, it is required 847798691e